DY-2 Family Pull-Off Testing/ Aalat Uji Tarikan

TOKO MARGA SETIA SURVEY

Berdagang alat- alat Kelautan, Alat Selam, Perahu Karet,Alat Keselamatan,

GPS Garmin, GPS Magellan, Alat Survey, Alat Ukur dan Aksesoris Alat Ukur.

Current Meter.Anemometer ,Anemometer Wireless,Weather station

Untuk keterangan, nego harga dan informasi produk lainnya, hubungi :

Name       : tatang survey

Alamat      : Jl .H.Kelik No.20 RT.03 / RW.08 Kelapa Dua Kebon Jeruk Jakarta Barat

Email        : tatangms409@gmail.com 

Telp          : 082124100046

WhatsApp  :082124100046

Features
top
Complete range of applications covered
The three models of the DY-2 Family differentiate by a maximum pulling force. While DY-216 (15.5 kN, 3485 lbf) is covering most applications, DY-206 (6 kN, 1349 lbf) has an increased accuracy for low strength applications such as testing adhesive strength of mortars and renders. DY-225 (25 kN, 5620 lbf) can be used for very high strength applications such as testing of fibre reinforced polymers bonded to concrete structures or testing the bond strength of repair and overlay materials.

Constant load rate
One of the major influences on the result of a pull-off test is the operator influence in the application of a constant load rate. The newly introduced DY-2 models with their integrated, feedback controlled motors remove this variable completely, by providing a fully automated test at a constant load rate which can be verified.

Unique in parameter setting
The DY-2 is further unique in that it records every single test parameter required by the specification: Time and date of the test, test disc size, maximum load applied, automatic calculation of bond strength, applied load rate with graphical record, complete time of test as well as the failure mode. For the very first time, the operator is able to provide a complete record of the pull-off test, proving that the test was carried out in accordance with the applicable standard.


The DY-2 is further unique in that it records every single test parameter required by the specification.

Time and date of the test
Test disc size
Maximum load applied
Automatic calculation of bond strength
Applied load rate with graphical record
Complete time of test
Failure mode
In Use


Technical Data
top
Technical Data
Accuracy and Resolution: EN ISO 7500-1 Class 1 (±1%)
Memory Capacity: 100 measurements
Battery Capacity: 1500 mAh, 3.75V (min. 80 measurements)
Charger Connection: USB type A (5V, 500mA)
Weight: 9.92 lbs (4.5 kg)
Dimensions of Housing: 4.29" x 9.45" x 8.10" (109 x 240 x 205.5 mm)
Operating Temperature: 32 to 122°F (-10 to 50°C)
Storage Temperature: 14 to 158°F (-10 to 70°C)


Simple Operation
top

Select Unit   Select Size
Select UNIT   Select size of TEST DISC

Select Load Rate   Start Test
Select LOAD RATE   Start TEST

Result
RESULT


Application Range
top
Three versions of DY-2 are available differentiated by maximum pulling force. This covers the complete range of pull-off applications (examples for Ø 50mm test discs):

Technical Data
  Tensile Force
Test Disc Ø 50mm
DY-206: 0.6 - 6 kN 0.3 - 3.1 MPa
135 - 1349 lbf 44 - 443 psi
DY-216: 1.6 - 15.5 kN 0.81 - 7.8 MPa
360 - 3485 lbf 118 - 1145 psi
DY-225: 2.5 - 25 kN 1.3 - 12.7 MPa
562 - 5620 lbf 185 - 1847 psi

DY-206 has increased accuracy for low strength applications such as testing adhesive strength of
mortars and renders. DY-216 covering most applications. DY-225 for very high strength applications
such as testing of fibre reinforced polymers bonded to concrete structures or testing the bond strength of
repair and overlay materials.


Failure Mode Reporting
top
Most pull-off testing standards require the operator to record the mode of failure. DY-2 is unique in that it allows this information to be saved along with the test result.

  Failure in
substrate
Bond failure at
concrete/overlay
interface
Failure in
overlay or
repair material
Bond failure at
epoxy/overlay
interface
Failure Mode

Failure Example For example "B 100%" indicates a complete failure in the overlay or repair material.


Complete Report of Load Rate: DY-Link Software
top
DY-2 provides documentary proof that the test was actually carried out with the specified load rate. The load rate curve is saved along with the test results and may be downloaded to a PC for reporting, or it may also be viewed in real time if the DY-2 is connected to a PC during the test.

Software


Complete Range of Test Discs
top
Test Disks
Depending on the application and material under test, the standards specify a wide range of test disc sizes.


Video
top



Prices
top


Prices subject to change    Prices listed in US dollars for domestic shipments within US, Canada, & Mexico only    Export orders require quotations - click here for a quote     For more info call us 1-800-762-2478 or 954-946-9454.
Item Number Item Prices

All units come complete with battery charger with USB cable, test disc Aluminum Ø 50mm/M10, draw bolt M10, torque screwdriver, software, operating instructions, calibration certificate and carrying case.

PA-346100 DY-206 Pull-off Tester, 6kN $5,634.00
PA-346200 DY-216 Pull-off Tester, 15.5kN 6,113.00
PA-346300 DY-225 Pull-off Tester, 25kN 7,344.00
Test Discs
PA-346500S Set of test discs, steel, Ø 50mm/M10 (set of 10) 104.00
PA-346501S Set of test discs, Aluminum, Ø 50mm/M10 (set of 10) 68.00
PA-346502S Set of test discs, Aluminum, Ø 20mm/M10 (set of 10) 44.00
PA-346503S Set of test discs, Aluminum, 50x50mm/M10 (set of 10) 80.00
PA-346504S Set of test discs, Aluminum, 40x40mm/M10 (set of 10) 73.00
PA-346505S Set of test discs, Aluminum, Ø 100mm/M10 (set of 3) 57.00
PA-346506S Set of test discs, Aluminum, 100x100mm/M10 (set of 3) 67.00
PA-346507S Set of test discs, Aluminum, Ø 75mm/M10 (set of 5) 66.00
Accessories
PA-346250 Draw bolt M10 short for DY-2 53.00
PA-346530 Adapter plate for large test discs 336.00
PA-346550 Fixing kit for vertical and overhead surfaces 139.00
Spare Parts
PA-346251 Battery Pack complete 222.00
PA-346231 Cover plate for battery compartment 117.00
PA-346247 Seal for battery compartment 11.00